Dịch vụ LG K42 mở mạng | LM-K420YM unlock network

LG K42 LM-K420YM mở mạng thành công,
Unlock network LG K420YM

Mã:

Selected USB connection type
Work ID: 0000000000F4EA17
Checking data...OK
Platform: LG MTK
Selected port: COM3
Selected baudrate: 921600
Selected model: K420YM
Connecting to phone...
Phone found at port COM14
Mode: Emergency
Initializing flash...OK
Model ID: LM-K420YM
Platform: mt6765
Code name: meh15lm
Android version: 10
SW version: LMK420YMAT-01-V10a-505-03-SEP-01-2020+0
LAF Version: 1.1
Product ID: 09MFD026Q3TW024H
IMEI: 356590-11-030776
Target operator: LAO
Hardware: rev_11
Battery level: 39%
Reading partitions...OK
LAF Error: 80000119.
Checking security...OK
--------------------------------------------------------------------------------
IMEI: 356590-11-030776-6
Bluetooth address: Unknown
Wi-Fi MAC address: Unknown
--------------------------------------------------------------------------------
Write security backup function doesn't work for this device with latest firmware versions. If you'll encounter any problem during Unlock operation - you won't be able to restore the phone to it's initial state, so proceed at your own risk.

Continue?
Creating EEPROM backup...OK
Connecting to phone...
Initializing flash...OK
Reading security area...
Backup saved to "K420YM_3565901103077_04-05-2021_15-50-06.EEP"
Connecting to server 0...OK
Octopus smart card is present.
Checking smart card...OK
Username: GSMVN
Authorizing...OK
Checking balance...OK
Checking operation...OK
Sending device information...OK
Get credits, needed for current operation...OK
Your balance: 100 credits.
To perform "Unlock" operation you need to have 100 credits.
Unlocking...OK
Writing security area...
Connecting to phone...
Initializing flash...OK
Writing security area...OK
Connecting to phone...
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Connecting to phone...
Initializing flash...OK
Removing write protection...OK
Connecting to phone...
Initializing flash...OK
Reading partitions...OK
Erasing part 1...OK
Connecting to phone...
Initializing flash...OK
Erasing part 2...OK
Connecting to phone...
Initializing flash...OK
Reading partitions...OK
Prepairing for change protect status...
Connecting to phone...
Initializing flash...OK
Restore write protection...OK
Connecting to phone...
Initializing flash...OK
Reading partitions...OK
Phone successfully unlocked!
Warning: If your device were stuck at logo, after operation was completed, then please, don't reflash your device, first contact with Support via Skype or create thread at forum!